Application

Bathrooms and kitchens

Most of a bathroom’s plumbing is hidden: hot and cold supply lines and concealed valve bodies sit inside the wall, waste pipes run below the floor, and a waterproofing layer protects the slab. What you see — mixers, showers, basins, WCs and floor drains — depends on that hidden work being right.

Kitchens follow the same pattern around the sink, with angle valves for appliances and a trap below.

Request a Quotation

Materials used

Related categories

CPVC pipes and fittingsCPVC pipes and fittings for hot and cold water supply.Ask for availability
Valves and cocksBall, gate, angle, non-return and float valves, and bib cocks.Ask for availability
Taps, mixers and showersTaps, mixers, diverters, showers and spouts.Ask for availability
SanitarywareWater closets, wash basins, urinals and cisterns.Ask for availability
Bathroom accessories and drainsFloor traps, drains, gratings, towel rails and accessories.Ask for availability
Kitchen sinks and fittingsKitchen sinks, waste couplings and sink fittings.Ask for availability
Waterproofing productsCoatings, membranes and admixtures that keep water out.Ask for availability
Tiles and flooring materialsFloor and wall tiles and related flooring materials.Ask for availability

See it in 3D

Behind the bathroom tiles

Hide the tiles to reveal the concealed pipework, then switch on the water flow.

Open full screen All 3D experiences

Building the 3D scene…

All parts in this scene (10)

A concealed diverter or mixer in the wall controls the shower and spout. Its body is installed before tiling.
Browse taps, mixers and showers
The concealed body sits within the wall with only the trim plate and handle visible after tiling.
Browse taps, mixers and showers
The basin connects to hot and cold supplies through angle valves and drains through a bottle trap.
Browse sanitaryware
WCs connect to a soil pipe and are filled through a cistern or a concealed flush valve.
Browse sanitaryware
A wall-mounted water heater feeds the hot line. Pipes for hot water must be rated for its temperature.
Browse CPVC pipes and fittings
Supply pipes are chased into the wall and pressure-tested before plastering and tiling.
Browse CPVC pipes and fittings
Waste pipes from the basin and floor trap and the soil pipe from the WC slope down towards the stack.
Browse SWR and drainage pipes and fittings
A floor trap with a grating sits at the lowest point of the shower area; the floor slopes gently towards it.
Browse bathroom accessories and drains
Tiles are fixed with tile adhesive and finished with grout. Anti-skid floor tiles are commonly used in wet areas.
Browse tiles and flooring materials
Wet areas receive a waterproof coating or membrane on the floor and the lower part of the walls before tiling.
Browse waterproofing products

Educational visualization only. Layouts, sizes and materials are simplified and are not an engineering drawing, installation guide or guarantee of compatibility. Consult a qualified engineer or plumber for your project.

Bathrooms and kitchens

Related categories

Behind the bathroom tiles

Have a list of materials ready?